Indicators on Mineral Processing Plant You Should Know

Are you trying to find a simple efficient gold recovery procedure?

Let me inform you concerning mineral processing equipment that is being used successfully all round the world, by large scale mining operations through to artisanal miners.

It’s an alternative to using cyanide.


One of the very simple and efficient technology does NOT require the use of harmful chemicals.

Sure, using a cyanide solution for gold leaching is prevalent.

BUT, as Wired magazine by the UK points out…

The waste product from cyanidation is a disgusting and poisonous gloop that can float into rivers or poison groundwater, killing wildlife and producing landscape sterile. Enormous pits of ore could be exposed to cyanide leaching in mines, with the runoff that a significant environmental hazard that requires a significant cost to stay secure.

Instead of that, why don’t you use gravity?

Gravity separation of fine gold has been the working principle in several cost-effective mineral processing plants, all over the world.

That is in both small and large-scale mineral extraction operations.

For instance, a little gold vibration table employs a low-capacity vibrating table for gold extraction.


Naturally, it’s not just for extracting gold. Mineral extraction using a concentrating table works for recovering other precious metals and minerals also, including all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is perfect for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For big throughputs and high capacity mining/processing surgeries, particularly for gold, we will be able to aid you with the most cost effective Centrifugal Concentrators.)


Larger plantations are utilizing Wave Tables to perform final gold clean-ups and the’finishing’ of gold concentrates. This procedure eliminates the need to utilize cyanide or mercury.

Gold tide tables are a lot better for your environment, as well as for workplace security!


When you want to efficiently recover fine gold out of gold bearing ore, then you need a Centrifugal Concentrator. For instance, a 1-3 TPH unit will take care of both alluvial and hard rock substance.

In a large mineral processing plant, you may use a Centrifugal Concentrator (known in some states as an STLB) to execute the key concentration. That is, to regain all the gold and heavy minerals out of the ore feed.

This recovered substance is known as the’concentrates’, or’cons’ for short.


But to really get’clean gold’, you have to then run the drawbacks through another procedure (a secondary concentrator), such as running the drawbacks above a Wave Table. As a result, an updated percentage is recovered that is a lot smaller in mass, therefore it’s easier to take care of.

When concentrates are cleaned up on a Wave Table, you produce clean gold ready to be smelted and turned into a gold bar for sale.

All this without having cyanide or mercury.

Another cyanide-free option is chemical leaching.

Gold can be extracted from run of mine ore as well as from concentrates using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system which can help you with.

CLS may be used for almost any metal but is especially used for the recovery of gold, silver and platinum group metals.

This incredible gold separation device comes in 3 versions covering all scales of operation. Despite the name, a gold wave table works to extract ANY heavy nutrient, in which there is a particular gravity (density) differential between the valuable heavy mineral component and its gangue or host substance. Additionally, it cleans grit and gold from the stripped carbon used in CIP/CIL software.


To quote Ian, a 30-year veteran from the mining and minerals sector,”I’ve personally had success with all the Wave Table regaining very nice heavy minerals such as gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. Because it is so effective at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, it’s frequently what you lose to tailings that is as critical as what you recuperate. I’ve discovered that the Wave Table is the greatest device to check tailings for missing heavy minerals, including gold. A very simple test on your tailings will only require a few minutes. You will observe any heavy nutrient dropped in the tailings in a brief time span. This type of test will obviate the need for prolonged firing assay turn around times.”


The most significant model is that the M10 which does up to 8TPH (tonnes per hour) and the M8 model does up to 1TPH. The smallest model, the M5, is acceptable for small cleanups of 20 kgs per hour and may be used as a lab unit.

– Better for office security also

– Never use mercury or cyanide again

– Efficient and cost-effective.

Whenever you’re on the lookout for gold recovery plant for sale, check out


The Wave Table may be used in the smallest to the largest gold mine. They may be used for full scale production functions, or just as a clean-up or concentration device in the golden room.

The Wave Table has become increasingly being used to recover gold from evaluation samples of a few kgs in size and upwards. This kind of bulk testing is quick and the quantitative results imply that you’re not solely relying on flame assays or AAS, especially in observable free gold deposits, even if the gold is ultra fine (5 to 20 microns).

Visit to learn more today.

We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.

Also learn more about Gold Recovery Plant For Sale here.